 | Lightweight 0.35 kg STA 0.35 kg light single tank adapter manufactured from 316 stainless steel. Includes 316 SS bolts, flat washers, spring washers and wing nuts. | $105 / $75 | $60 | |
 | Camstrap - injection molded buckle (pair) - LAST PAIR! Camstrap with lightweight molded buckle. Sold only in pairs. | $66 | $40 | |
 | Stainless steel buckle - heavy duty Stainless steel buckle for harnesses and weight belts. | $16 / $12 | $10 | |
 | 50mm D-ring - straight Straight 50mm 316 stainless steel D-ring. | $8 | $5 | |
 | 50mm D-ring - bent Bent 50mm 316 stainless steel D-ring. | $8 | $5 | |
 | 150cm SMB - yellow 150cm Surface Marker Buoys (SMBs) are ideal for use during decompression or ascents. These are a duckbill type bag, inflated using a second stage - no LP inflator hoses to unhook / reattach! These bags will not leak gas, even if tipped over - the expanding air as the markers ascend closes the fillway, and an over-pressure/dump valve ensures the marker will not burst from overexpansion. These are high profile signalling devices, and are visible for up to a kilometre or more with the naked eye during daylight. At night, shine your primary light inside the tube from beneath for a signal that is visible for many kilometres. Two colours available - some divers carry one of each if conditions warrant. Yellow - recommended for emergency signalling. | $109 | $80 | |
 | 23kg (50lb) Liftbag - yellow 23kg lift bags are ideal for use during decompression or ascents, and for light artifact/item recovery use. Sharing the same design as the 150cm surface marker, these bags are filled using a second stage, and will not leak gas. Yellow - recommended for emergency signalling, or general artifact recovery use. | $109 | $80 | |
 | 23kg (50lb) Liftbag - orange 23kg lift bags are ideal for use during decompression or ascents, and for light artifact/item recovery use. Sharing the same design as the 150cm surface marker, these bags are filled using a second stage, and will not leak gas. Orange - recommended for general and decompression use. | $109 | $80 | |
 | SMB / Float pocket SMB pockets have a sewn webbing strip with loops allowing them to be ziptied to the bottom of a backplate, or O-Pac. Velcro ends ensure that your marker is secure until required. | $32 | $20 | |
 | G-Pocket The new G-Pocket is a bellows pocket designed to be glued onto a wetsuit or neoprene drysuit. Neoprene backing allows the pocket to move with the suit as it stretches. Velcro closure. Roomy enough to stuff an SMB and spool, without being ridiculously oversized. Has an internal divider for slate or wetnotes. Glue not included. | $69 | $50 | |
 | Teledyne K1D Teledyne K1D oxygen sensor for the Sport KISS rebreather. This item is "new old stock" - in storage for approximately 2 years. Discounted significantly! As-is. Not recommended for diving use. | $130 | $25 | |
 | 1-1/8 boltsnap 1-1/8 boltsnap, made from 316 stainless steel. Suitable for stage tank rigging, reels, larger items. | $12 | $9 | |
 | LP hose - 24 inch x 3/8 - ONLY FIVE BUCKS! Backup regulator - 61cm / 24 inch LP with 3/8 UNF fitting. Use with a bungee necklace for your backup second stage under your chin. | $45 / $20 / $10 | $5 | |
 | HP hose - 6 inch - ONLY ONE LEFT! Stage / decompression SPG - 15cm / 6 inch with 7/16 UNF fitting. The correct length for mounting a SPG on stage and decompression regulators. | $38 | $20 | |
 | Weight bag XS-Scuba weight bag - designed to carry up to 27kg/60lb of weight. Includes shoulder strap. | $45 / $25 | $20 | |
 | Regulator bag XS-Scuba regulator bag - thick padding, outer pocket. Includes shoulder strap. | $45 / $25 | $20 | |
Click here to check out
|
